dmesg - Gigabyte NVIDIA GeForce GTX 650 Ti

Return To Gigabyte NVIDIA GeForce GTX 650 Ti System Information

Linux version 4.9.16-1-MANJARO (builduser@manjaro) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Sun Mar 19 07:53:55 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d353efff] usable
BIOS-e820: [mem 0x00000000d353f000-0x00000000dd829fff] reserved
BIOS-e820: [mem 0x00000000dd82a000-0x00000000dd839fff] ACPI data
BIOS-e820: [mem 0x00000000dd83a000-0x00000000ddb97fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddb98000-0x00000000de644fff] reserved
BIOS-e820: [mem 0x00000000de645000-0x00000000de645fff] usable
BIOS-e820: [mem 0x00000000de646000-0x00000000de84bfff] ACPI NVS
BIOS-e820: [mem 0x00000000de84c000-0x00000000dec66fff] usable
BIOS-e820: [mem 0x00000000dec67000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/A85XM-A, BIOS 6002 03/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CEFFF write-protect
  CF000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 base 0000DF000000 mask FFFFFF000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000041f000000 aka 16880M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01d59000, 0x01d59fff] PGTABLE
BRK [0x01d5a000, 0x01d5afff] PGTABLE
BRK [0x01d5b000, 0x01d5bfff] PGTABLE
BRK [0x01d5c000, 0x01d5cfff] PGTABLE
BRK [0x01d5d000, 0x01d5dfff] PGTABLE
BRK [0x01d5e000, 0x01d5efff] PGTABLE
RAMDISK: [mem 0x3721b000-0x37904fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD833070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DD8393D0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)
ACPI: DSDT 0x00000000DD833168 006261 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000DDB8D080 000040
ACPI: APIC 0x00000000DD8394E0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DD839558 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DD8395A0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: BGRT 0x00000000DD839B28 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
ACPI: HPET 0x00000000DD839638 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000DD839670 0004B7 (v02 AMD    ANNAPURN 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41eff5000-0x41eff9fff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000041effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000d353efff]
  node   0: [mem 0x00000000de645000-0x00000000de645fff]
  node   0: [mem 0x00000000de84c000-0x00000000dec66fff]
  node   0: [mem 0x00000000deff4000-0x00000000deffffff]
  node   0: [mem 0x0000000100001000-0x000000041effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4139267
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13478 pages used for memmap
  DMA32 zone: 862567 pages, LIFO batch:31
  Normal zone: 51136 pages used for memmap
  Normal zone: 3272703 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd353f000-0xdd829fff]
PM: Registered nosave memory: [mem 0xdd82a000-0xdd839fff]
PM: Registered nosave memory: [mem 0xdd83a000-0xddb97fff]
PM: Registered nosave memory: [mem 0xddb98000-0xde644fff]
PM: Registered nosave memory: [mem 0xde646000-0xde84bfff]
PM: Registered nosave memory: [mem 0xdec67000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xdf000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88041ec00000 s103512 r8192 d31656 u524288
pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4074568
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16207448K/16557068K available (6270K kernel code, 1076K rwdata, 1956K rodata, 1280K init, 1032K bss, 349620K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3417.223 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6837.21 BogoMIPS (lpj=11390743)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c4f000 - ffffffff81c55000)
ftrace: allocating 24800 entries in 97 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) X4 750K Quad Core Processor (family: 0x15, model: 0x10, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27346.16 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdd83a000-0xddb97fff] (3530752 bytes)
PM: Registering ACPI NVS region [mem 0xde646000-0xde84bfff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  5:06:28, date: 03/26/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfe106000-0xfe107fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfe104000-0xfe105fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe10c000-0xfe10c7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe10b000-0xfe10bfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe10a000-0xfe10a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe109000-0xfe109fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe108000-0xfe1080ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe100000-0xfe103fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10de:11c6] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfa104000-0xfa104fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfa100000-0xfa103fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.2:   bridge window [mem 0xfa100000-0xfa1fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd353f000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xde646000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec67000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:03: [io  0x040b] has been reserved
system 00:03: [io  0x04d6] has been reserved
system 00:03: [io  0x0c00-0x0c01] has been reserved
system 00:03: [io  0x0c14] has been reserved
system 00:03: [io  0x0c50-0x0c51] has been reserved
system 00:03: [io  0x0c52] has been reserved
system 00:03: [io  0x0c6c] has been reserved
system 00:03: [io  0x0c6f] has been reserved
system 00:03: [io  0x0cd0-0x0cd1] has been reserved
system 00:03: [io  0x0cd2-0x0cd3] has been reserved
system 00:03: [io  0x0cd4-0x0cd5] has been reserved
system 00:03: [io  0x0cd6-0x0cd7] has been reserved
system 00:03: [io  0x0cd8-0x0cdf] has been reserved
system 00:03: [io  0x0800-0x089f] has been reserved
system 00:03: [io  0x0b20-0x0b3f] has been reserved
system 00:03: [io  0x0900-0x090f] has been reserved
system 00:03: [io  0x0910-0x091f] has been reserved
system 00:03: [io  0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.2:   bridge window [mem 0xfa100000-0xfa1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xf0000000-0xffffffff window]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 2 [mem 0xfa100000-0xfa1fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7080K (ffff88003721b000 - ffff880037905000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcf53f000-0xd353f000] (64MB) mapped at [ffff8800cf53f000-ffff8800d353efff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r8 (with cgroups support)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90001e00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
  Magic number: 9:527:113
rtc_cmos 00:05: setting system clock to 2017-03-26 05:06:28 UTC (1490504788)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1280K (ffffffff81b0f000 - ffffffff81c4f000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1908K (ffff880001623000 - ffff880001800000)
Freeing unused kernel memory: 92K (ffff8800019e9000 - ffff880001a00000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe10a000
libata version 3.00 loaded.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe108000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
ohci-pci: OHCI PCI platform driver
xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c100 irq 34
ata2: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c180 irq 34
ata3: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c200 irq 34
ata4: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c280 irq 34
ata5: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c300 irq 34
ata6: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c380 irq 34
ata7: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c400 irq 34
ata8: SATA max UDMA/133 abar m2048@0xfe10c000 port 0xfe10c480 irq 34
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe10b000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe109000
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new full-speed USB device number 2 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
hidraw: raw HID events driver (C) Jiri Kosina
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133
ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata2.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
ata2.00: configured for UDMA/100
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer Naga Chroma as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:1532:0053.0001/input/input2
hid-generic 0003:1532:0053.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Naga Chroma] on usb-0000:00:10.0-1/input0
input: Razer Razer Naga Chroma as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:1532:0053.0002/input/input3
hid-generic 0003:1532:0053.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Naga Chroma] on usb-0000:00:10.0-1/input1
input: Razer Razer Naga Chroma as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.2/0003:1532:0053.0003/input/input4
usb 1-5: new high-speed USB device number 3 using ehci-pci
usb 7-1: new full-speed USB device number 2 using ohci-pci
usb 3-2: new high-speed USB device number 3 using xhci_hcd
scsi 1:0:0:0: CD-ROM            HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA HDWD130  ACF0 PQ: 0 ANSI: 5
hid-generic 0003:1532:0053.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Naga Chroma] on usb-0000:00:10.0-1/input2
scsi 5:0:0:0: Direct-Access     ATA      TOSHIBA HDWD130  ACF0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
usb-storage 1-5:1.0: USB Mass Storage device detected
scsi host8: usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
 sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.0/0003:1532:0214.0004/input/input5
hid-generic 0003:1532:0214.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-1/input0
input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.1/0003:1532:0214.0005/input/input6
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
random: fast init done
hid-generic 0003:1532:0214.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-1/input1
input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.2/0003:1532:0214.0006/input/input7
hid-generic 0003:1532:0214.0006: input,hidraw5: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-1/input2
tsc: Refined TSC clocksource calibration: 3417.009 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x314112449c3, max_idle_ns: 440795280279 ns
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
scsi 8:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:2: [sde] Attached SCSI removable disk
sd 8:0:0:3: [sdf] Attached SCSI removable disk
sd 8:0:0:0: [sdc] Attached SCSI removable disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3417008481 Hz
vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000)
EXT4-fs (sda3): re-mounted. Opts: (null)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
r8168 Gigabit Ethernet driver 8.043.02-NAPI loaded
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168  Copyright (C) 2016  Realtek NIC software team  
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see . 
                This is free software, and you are welcome to redistribute it under certain conditions; see . 
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x14
sp5100_tco: I/O address 0x0cd6 already in use
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 246
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.39  Tue Jan 31 20:47:00 PST 2017
 (using threaded interrupts)

input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
[drm] Initialized
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 7-4: new full-speed USB device number 3 using ohci-pci
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.3/0003:046D:0A0C.0007/input/input19
hid-generic 0003:046D:0A0C.0007: input,hidraw6: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:12.0-4/input3
r8168 0000:04:00.0 enp4s0: renamed from eth0
systemd[1]: Created slice system-configure\x2dprinter.slice.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.39  Tue Jan 31 19:41:48 PST 2017
asus_wmi: ASUS WMI generic driver loaded
systemd[1]: Found device TOSHIBA_HDWD130 2.
Adding 33554428k swap on /dev/sda2.  Priority:-1 extents:1 across:33554428k FS
systemd[1]: Reached target Swap.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Mounted Temporary Directory.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input20
asus_wmi: Number of fans: 1
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x177F
usbcore: registered new interface driver usblp
systemd-journald[199]: Received request to flush runtime journal from PID 1
usbcore: registered new interface driver snd-usb-audio
mousedev: PS/2 mouse device common for all mice
input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.1/0003:1532:0214.0005/input/input21
input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.0/0003:1532:0214.0004/input/input22
input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.2/0003:1532:0214.0006/input/input23
razerkbd 0003:1532:0214.0005: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-1/input1
razerkbd 0003:1532:0214.0004: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-1/input0
razerkbd 0003:1532:0214.0006: input,hidraw5: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-1/input2
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
enp4s0: 0xffffc90001935000, 60:a4:4c:b3:8e:64, IRQ 35
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-1bb0a8b4-17be-91c3-7791-14206a171b86) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 15
r8168: enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
usblp0: removed
Did not find alt setting 1 for intf 0, config 1
usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x177F
usblp0: removed
usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x177F
usblp0: removed
Did not find alt setting 1 for intf 0, config 1
usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x177F
fuse init (API version 7.26)
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 6
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 4
usb usb7-port4: disabled by hub (EMI?), re-enabling...
usb 7-4: USB disconnect, device number 3
usb 7-4: new full-speed USB device number 4 using ohci-pci
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.3/0003:046D:0A0C.0008/input/input24
hid-generic 0003:046D:0A0C.0008: input,hidraw6: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:12.0-4/input3
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
nvidia-modeset: Freed GPU:0 (GPU-1bb0a8b4-17be-91c3-7791-14206a171b86) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
nvidia-modeset: Allocated GPU:0 (GPU-1bb0a8b4-17be-91c3-7791-14206a171b86) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 35
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 34
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 34
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 35
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 30
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 32
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 38

Return To Gigabyte NVIDIA GeForce GTX 650 Ti System Information